Cadillac 2015 Escalade Owner's Manual page 351

10-58 Vehicle Care
3. Assemble the two jack handle
extensions (4) and wheel
wrench (5), as shown.
4. Insert the open end of the
extension (7) through the hole in
the rear bumper (8) (hoist shaft
access hole).
Be sure the hoist end of the
extension (7) connects to the
hoist shaft. The ribbed square
end of the extension is used to
lower the spare tyre.
5. Turn the wheel wrench
anti-clockwise to lower the spare
tyre to the ground. Continue to
turn the wheel wrench until the
spare tyre can be pulled out
from under the vehicle.
6. Use the wheel wrench hook to
pull the hoist cable closer to
assist in reaching the spare tyre.