Table of Contents
Advertisement
Prestige 652 Series User's Guide
The following table describes the fields in this menu.
FIELD
The ESSID (Extended Service Set IDentifier) identifies the service set the
wireless station is to connect to. Wireless stations associating to the Access
ESSID
Point must have the same ESSID. Enter a descriptive name up to 32 printable
7-bit ASCII characters.
Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing beacon
Hide ESSID
frame so a station cannot obtain the ESSID through passive scanning.
Press [SPACE BAR] to select a channel. This allows you to set the operating
Channel ID
frequency/channel depending on your particular region.
RTS(Request To Send) threshold (number of bytes) enables RTS/CTS
handshake. Data with its frame size larger than this value will perform the
RTS
RTS/CTS handshake. Setting this attribute to be larger than the maximum
Threshold
MSDU (MAC Service Data Unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
between 0 and 2432.
The threshold (number of bytes) for the fragmentation boundary for directed
Frag.
messages. It is the maximum data fragment size that can be sent. Enter a
Threshold
value between 256 and 2432.
27-2
Menu 3.5- Wireless LAN Setup
ESSID= Wireless
Hide ESSIS = No
Channel ID= CH01 2412MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Press ENTER to Confirm or ESC to Cancel:
Figure 27-1 Menu 3.5 - Wireless LAN Setup
Table 27-1 Menu 3.5 - Wireless LAN Setup
DESCRIPTION
EXAMPLE
Wireless
No
CH01
2412MHz
2432
2432
Wireless LAN Setup
Advertisement
Table of Contents
