Table of Contents
Advertisement
Press Space Bar to Toggle.
The following table describes the fields in this menu.
FIELD
Dial-Backup:
Active
Use this field to turn the dial-backup feature on (Yes) or off (No).
Port Speed
Press [SPACE BAR] and then press [ENTER] to select the speed of the
connection between the Dial Backup port and the external device.
Available speeds are:
9600, 19200, 38400, 57600, 115200 or 230400 bps.
AT Command
String:
Init
Enter the AT command string to initialize the WAN device. Consult the
manual of your WAN device connected to your Dial Backup port for
specific AT commands.
Edit Advanced
To edit the advanced setup for the Dial Backup port, move the cursor to
Setup
this field; press the [SPACE BAR] to select Yes and then press
[ENTER] to go to Menu 2.2.1 Advanced Dial Backup Setup.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
Menu 2 WAN Backup Setup
Menu 2.2 - Dial Backup Setup
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
Figure 25-3 Menu 2.2 Dial Backup Setup
Table 25-3 Menu 2.2 Dial Backup Setup
DESCRIPTION
Prestige 652 Series User's Guide
EXAMPLE
No
115200
at&fs0=0
Yes
25-5
Advertisement
Table of Contents
