Table of Contents
Advertisement
Step 3.
Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Step 4.
After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
38.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your Prestige since FTP is
faster. Please note that you must wait for the system to automatically restart after the file transfer is
complete.
Firmware and Configuration File Maintenance
Figure 38-5 Backup Configuration Example
** Backup Configuration completed. OK.
### Hit any key to continue.###
Figure 38-6 Successful Backup Confirmation Screen
Prestige 652 Series User's Guide
Type a location for storing the
configuration file or click Browse to
look for one.
Choose the Xmodem protocol.
Then click Receive.
38-7
Advertisement
Table of Contents
