ZyXEL Communications Prestige 652 Series User Manual page 314

Prestige 652 Series User's Guide
FIELD
Rem Login
Rem Password
Outgoing:
My Login
My Password
Authen
Route
Bridge
Edit IP/Bridge
Edit ATM Options
Edit Advance
Options
Telco Option
29-4
Table 29-1 Menu 11.1 Remote Node Profile
Type the login name that this remote node will use to call your
Prestige. The login name and the Rem Password will be used to
authenticate this node.
Type the password used when this remote node calls your Prestige.
Type the login name assigned by your ISP when the Prestige calls
this remote node.
Type the password assigned by your ISP when the Prestige calls this
remote node.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP – Your Prestige will accept either CHAP or PAP when
requested by this remote node.
CHAP – accept CHAP (Challenge Handshake Authentication
Protocol) only.
PAP – accept PAP (Password Authentication Protocol) only.
This field determines the protocol used in routing. Options are IP and
None.
When bridging is enabled, your Prestige will forward any packet that
it does not route to this remote node; otherwise, the packets are
discarded. Select Yes to enable and No to disable.
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options.
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.6 – Remote Node ATM Layer Options.
This field is only available when you select PPPoE in the
Encapsulation field.
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.8 – Advance Setup Options. This field is not available on
all models.
DESCRIPTION EXAMPLE
Remote Node Configuration
IP
No
No
No
No