Table of Contents
Advertisement
Prestige 652 Series User's Guide
Figure 13-5 Adding/Editing Source and Destination Addresses
The following table describes the fields in this screen.
Table 13-4 Adding/Editing Source and Destination Addresses
LABEL
Address Type
Start IP Address
End IP Address
Subnet Mask
Apply
Cancel
13.8 Timeout
The fields in the Timeout screens are the same for Local and Internet networks, so
13-12
Do you want your rule to apply to packets with a particular (single) IP address, a
range of IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP
address? Select an option from the drop-down list box that includes: Single
Address, Range Address, Subnet Address and Any Address.
Type the single IP address or the starting IP address in a range here.
Type the ending IP address in a range here.
Type the Subnet Mask here, if applicable.
Click Apply to save your changes back to the Prestige.
Click Cancel to return to the previously saved settings.
the discussion below refers to both.
DESCRIPTION
Creating Custom Rules
Advertisement
Table of Contents
