ZyXEL Communications Prestige 652 Series User Manual page 75

LABEL
If set to Server, your Prestige can assign IP addresses, an IP default gateway and
DNS servers to Windows 95, Windows NT and other systems that support the DHCP
client.
If set to None, the DHCP server will be disabled.
DHCP
If set to Relay, the Prestige acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients. Enter the IP
address of the actual, remote DHCP server in the Remote DHCP Server field in this
case.
When DHCP is used, the following items need to be set:
Client IP Pool
This field specifies the first of the contiguous addresses in the IP address pool.
Starting Address
Size of Client IP
This field specifies the size or count of the IP address pool.
Pool
Primary DNS Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
Server clients along with the IP address and the subnet mask.
Secondary DNS
As above.
Server
Remote DHCP If Relay is selected in the DHCP field above then enter the IP address of the actual
Server remote DHCP server here.
TCP/IP
Enter the IP address of your Prestige in dotted decimal notation, for example,
IP Address
192.168.1.1 (factory default).
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
RIP Direction Select the RIP direction from None, Both, In Only and Out Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish
Multicast membership in a multicast group. The Prestige supports both IGMP version 1 (IGMP-
v1) and IGMP-v2. Select None to disable it.
Apply Click this button to save these settings back to the Prestige.
LAN Setup
Table 5-1 LAN
DESCRIPTION
Prestige 652 Series User's Guide
5-5