Table of Contents
Advertisement
Prestige 652 Series User's Guide
25.6 Remote Node Profile (Backup ISP)
Enter 8 in Menu 11 Remote Node Setup to open Menu 11.1 Remote Node Profile (Backup ISP) (shown
below) and configure the setup for your dial backup port connection.
Rem Node Name= ?
Active= Yes
Outgoing:
Figure 25-5 Menu 11.1 Remote Node Profile (Backup ISP)
The following table describes the fields in this menu.
Table 25-6 Menu 11.1 Remote Node Profile (Backup ISP)
FIELD
Rem Node
Enter a descriptive name for the remote node. This field can be up to
Name
eight characters.
Active
Press [SPACE BAR] and then [ENTER] to select Yes to enable the
remote node or No to disable the remote node.
Outgoing
My Login
Enter the login name assigned by your ISP for this remote node.
My Password
Enter the password assigned by your ISP for this remote node.
25-8
Menu 11.1 - Remote Node Profile (Backup ISP)
My Login=
My Password= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel:
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP= No
Edit Script Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
DESCRIPTION
EXAMPLE
LAoffice
Yes
jim
*****
Menu 2 WAN Backup Setup
Advertisement
Table of Contents
