Figure 10 Internet Connection With Pppoa; Table 9 Internet Connection With Pppoa - ZyXEL Communications P-660W-Tx User Manual

Table 8 Internet Connection with ENET ENCAP (continued)
LABEL
ENET ENCAP
Gateway
Network
Address
Translation
Back
Next

Figure 10 Internet Connection with PPPoA

The following table describes the fields in this screen.

Table 9 Internet Connection with PPPoA

LABEL
User Name
Password
IP Address
Connection
P-660W-Tx v2 User's Guide
DESCRIPTION
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
chapter for more details.
Click Back to go back to the first wizard screen.
Click Next to continue to the next wizard screen.
DESCRIPTION
Enter the login name that your ISP gives you.
Enter the password associated with the user name above.
This option is available if you select Routing in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Click Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise click Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Select Connect on Demand when you don't want the connection up all the time and
specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default setting
selects Connection on Demand with 0 as the idle time-out, which means the Internet
session will not timeout.
Select Nailed-Up Connection when you want your connection up all the time. The
ZyXEL Device will try to bring up the connection automatically if it is disconnected.
Chapter 3 Connection Setup Wizard
43