Figure 16 Internet Connection With Pppoa; Table 9 Internet Connection With Pppoa - ZyXEL Communications P-791R V2 - V3.40 User Manual

Table 8 Internet Connection with ENET ENCAP (continued)
LABEL
IP Address
Subnet Mask
Gateway IP
address
First DNS
Server
Second DNS
Server
Back
Apply
Exit

Figure 16 Internet Connection with PPPoA

The following table describes the fields in this screen.

Table 9 Internet Connection with PPPoA

LABEL
User Name
Password
Back
Apply
Exit
• If the user name and/or password you entered for PPPoE or PPPoA connection are not
correct, the screen displays as shown next. Click Back to Username and Password setup
to go back to the screen where you can modify them.
P-791R v2 User's Guide
DESCRIPTION
Enter your ISP assigned IP address.
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are implementing
subnetting.
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
As above.
Click Back to go back to the previous wizard screen.
Click Apply to save your changes to the ZyXEL Device.
Click Exit to close the wizard screen without saving your changes.
DESCRIPTION
Enter the login name that your ISP gives you.
Enter the password associated with the user name above.
Click Back to go back to the previous wizard screen.
Click Apply to save your changes to the ZyXEL Device.
Click Exit to close the wizard screen without saving your changes.
Chapter 3 Wizard Setup for Internet Access
51