Table of Contents
Advertisement
The following table describes the fields in this screen.
Table 10 Internet Access Wizard Setup: LAN Configuration
LABEL
LAN IP Address
LAN Subnet Mask
DHCP
DHCP Server
Client IP Pool Starting
Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS Server As above.
Back
Finish
4 The ZyXEL Device automatically tests the connection to the computer(s) connected to
the LAN ports. To test the connection from the ZyXEL Device to the ISP, click Start
Diagnose. Otherwise click Return to Main Menu to go back to the Site Map screen.
Figure 13 Internet Access Wizard Setup: Connection Tests
Launch your web browser and navigate to www.zyxel.com. Refer to the rest of this guide for
more detailed information on the complete range of ZyXEL Device features. If you cannot
access the Internet, open the web configurator again to confirm that the Internet settings you
configured in the Wizard Setup are correct.
P-660W-Tx v2 User's Guide
DESCRIPTION
Enter the IP address of your ZyXEL Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
If you changed the ZyXEL Device's LAN IP address, you must use the new IP
address if you want to access the web configurator again.
Enter a subnet mask in dotted decimal notation.
From the DHCP Server drop-down list box, select On to allow your ZyXEL
Device to assign IP addresses, an IP default gateway and DNS servers to
computer systems that support the DHCP client. Select Off to disable DHCP
server.
When DHCP server is used, set the following items:
This field specifies the first of the contiguous addresses in the IP address
pool.
This field specifies the size or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are passed to
the DHCP clients along with the IP address and the subnet mask.
Click Back to go back to the previous screen.
Click Finish to save the settings and proceed to the next wizard screen.
Chapter 3 Connection Setup Wizard
45
Advertisement
Table of Contents
Troubleshooting
