Battery Voltage Level; Battery Operating Time - Kenwood TH-78A Instruction Manual

4 Battery Voltage Level

The meter indicates the relative battery voltage
during transmit.
Recharge or replace the batteries when the level
reaches the low indicator.
Manganese or Alkaline Batteries
Load 6 X R6 (AA) manganese or alkaline batteries in
series in the optional battery case(BT-8). Be sure to
observe the polarities. We recommend use of high
performance Alkaline batteries.
Manganese or Alkaline batteries
New batteries
Approximate battery condition
Output power: EL
Need to change batteries
5 Battery Operating Time (hours)
144MHz
7.5 !
* 6 seconds transmission, 6 seconds reception, 48
seconds reception with no signal recommended.
AF output 0.2W/8 ohms.
* Battery saver function on.
CAUTION
The display indicator flashes and the POWER switch
will not work when the battery starts to go flat.
When this happens, recharge or replace the battery.
We recommend use of the NiCd battery pack for
long transmission or extended operation.
Manganese batteries ( except Alkaline manganese
batteries ) may be used for Low or EL position.
430/440MHz
13 36 6 10 32