Quick Reference - Kenwood TH-78A Instruction Manual

Note : The plus symbol (+) means press two keys simultaneously.
"(1 second)" means press the key for longer than one (1) second.
TO DO THIS
Temporarily change the volume or frequency
of the band that cannot control
DetermIne if a frequency is in use before
transmitting
The LCD illumination lamp lights
Change the frequency in 1 MHz step
VFO mode
Memory channel recall mode
Activate call channel function
Recall the received message
Exchange Main and Sub band contents
Activate all function (blue letters)
Memory data entering mode
Activate tone encoder
Exchange dual band reception or single band
reception
Select desired transmitter offset direction

QUICK REFERENCE

PRESS
E.CHG
Activate Band scan
Activate Memory channel scan
MONI
Activate CALL scan
Select volume or encoder mode
LAMP
The LCD illumination lamp lights at all times
MHz
Memory shift
VFO
MR Activate VFO/Memory scan
CALL Activate VFO/Memory/Call scan
Turn message function on or off
MSG
Turn automatic band change function on or
BAND
off
F
Activate PAGING mode
M
Activate DTSS function
TONE
Activate CTCSS function
DUAL
Activate alert function
SHIFT Aktivate tone alert function
I
"then" means press two keys in sequence.
TO DO THIS
PRESS
VFO (1 second)
MR (1 second)
CALL (1 second)
F then E.CHG
F then LAMP
F then VFO
F then MR
F then CALL
F then MSG
F then BAND
F then 1
F then 2
F then 3
F then 4
F then 5
69