Basic Receiving Functions - Kenwood TH-78A Instruction Manual

5 To confirm that the programming was properly
performed rotate the Tuning control. The transceiver
should not go above or below the programmed band
limits.
VFO tuning range
144.000 145.000
I I
I
To clear the programmed limits simultaneously reset
the VFO memory using the procedures discussed on
page 19.
You can reprogram either limit independently by
following the appropriate instructions above.
16
146.000 147.000
I I

6 Basic Receiving Functions

When receiving a signal, the Main/Sub S-meter
deflects and the Main/Sub BUSY indicators appea
Rotate the volume control to the desired level.
Note
For information about more advanced receiving
capabilities, see Enhanced Receiver Function on
page 48