Preparation; Installing/ Removing The Battery Pack - Kenwood ProTalk DIGITAL TK-3701D User Manual

INSTALLING/ REMOVING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before use.
CAUTION
◆ Do not short the battery terminals or dispose of the battery by fire.
◆ Never attempt to remove the casing from the battery pack.
Align the battery pack with the back of the
1
transceiver, then press the battery pack and
transceiver firmly together until the release latch on
the base of the transceiver locks.
To remove the battery pack, lift the safety catch on
2
the base of the transceiver, then press the release
latch underneath the safety catch.
While pressing the release latch, pull the battery
3
pack away from the transceiver.

PREPARATION

3