Clock Function; Time Setting; Timer Function - Kenwood TH-78A Instruction Manual

If you press the F key, then the 7 key in receive
mode, the clock is displayed on the Sub band
display. The time is displayed on a 24-hour basis. If
you press the F key, then the 7 key again, the clock
is canceled, and the normal frequency display
returns.

1 Time Setting

1 Press and hold the F key for longer than one
second, then the 7 key, the clock is displayed on the
Main band display.
2 Set the "Hour" display to the current hour with the
Tuning control.
3 Press the M key.
4 Set the "Minute" display to the current minute with
the Tuning control.
5 Press the F key.
Time Alarm Setting
When you press the 0 key in clock setting mode, the
"second" display is cleared, and counting begins
from 0 seconds.
54

CLOCK FUNCTION

2 Timer Function

Switch-on Timer Setting
1 If you press and hold the F key for longer than one
second, then the 8 key, you enter the switch-ON
timer setting mode, and the TIMER.ON indicator and
the "Hour" display will flash.
2 Set the "Hour" display to the time you want the
transceiver to turn on with the Tuning control.
3 Press the M key.
4 Set the "Minute" display to the time you want the
transceiver to turn on with the Tuning control.
5 Press the F key.