Glass Assembly; Grilles And Trim; Air Shutter Settings - Heat & Glo Bravo Owner's Manual

F. Glass Assembly
WARNING
Handle glass doors with care.
• Inspect the gasket to ensure it is
undamaged.
• Inspect the glass for cracks, chips or
scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass door removed,
cracked, broken or scratched.
• Replace glass door assembly as a complete appliance.
Removing Glass Assembly
• Unscrew the two top wing bolts and unlatch the two bottom
spring clips (see Figure 12.2).
• Remove the front trim door and the glass door from the
appliance.
Replacing Glass Assembly
Replace the glass door and a front trim door on the
•
appliance. Pull out and latch the spring clips into the
tabs on the glass frame and tighten the top wing bolts.
Figure 12.2 Glass Assembly
40
G. Grilles and Trim
Install optional marble and brass trim surround kits as de-
sired. Marble, brass, brick, tile, or other noncombustible
materials can be used to cover up the gap between the
sheet rock and the appliance.
H. Air Shutter Settings
GLASS
CLIPS
Heat & Glo • Bravo • 704-902 Rev. D • 5/08
NG
Burner 1/8 in.
LP
1/2 in.