Framing And Clearances; Selecting Appliance Location - Heat & Glo Bravo Owner's Manual

3 3

Framing and Clearances

Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see fi gure 3.1).
½
½
A
Note: These dimensions
are for fl ush wall fi nishing
method. For a recessed
arch fi nishing method refer
to Option B in Finishing
(Section 11).
Figure 3.1 Appliance Locations
A
B
C
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Section 3.C and 3.D)
• Vent Clearances and Framing (Section 6).
A
Inches 45-1/8
Millimeters 1146
Heat & Glo • Bravo • 704-902 Rev. D • 5/08
Note: For actual appliance dimensions refer to Section 16.
B
B C
34-3/8 63-7/8 25-1/4
873 1622
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
B
E
D
D E
No maximum
641
7