DSC PowerSeries PC1616 Installation Manual page 32

PowerSeries - PC1616/PC1832/PC1864
[006] Installer's Code
Default
5555
I_______I_______I_______I_______I
Programmable Output Options
01 Residential Burglary and Fire Bell Output
02 For Future Use
Sensor Reset [*][7][2]
03
2 Wire Smoke Support (PGM 2 only)
04
System Armed Status
05
06 Ready To Arm
07 Keypad Buzzer Follow Mode
08 Courtesy Pulse
System Trouble Output (with Trouble options)
09
System Event [Strobe (with Event options)]
10
System Tamper (all sources: zones, keypad, modules)29
11
12 TLM and Alarm
13 Kissoff Output
14 Ground Start Pulse
Remote Operation (DLS-3 Support)
15
For Future Use
16
17 Away Armed Status
[009] PGM1 and PGM2 Output Programming (Main Panel)
Program PGM Option Attributes in sections [501] - [514]. Program PGM partitions in sections [551] - [564]
PC1616 and PC1832 have 2 onboard PGMs (PGM 1 and 2). PC1864 has 4 onboard PGMs (PGM 1-4)
Default
19 PGM 1
I_______I_______I
[010] PGM3 to PGM10 Output Programming (Main Panel/PC5208)
Program PGM Option Attributes in sections [501] - [514]. Program PGM partitions in sections [551] - [564]
Default
01 PGM 3 (main panel/PC5208)*
I_______I_______I
01 PGM 4 (main panel/PC5208)*
I_______I_______I
01 PGM 5 (PC5208)
I_______I_______I
01 PGM 6 (PC5208)
I_______I_______I
These two sections allow you to program both PGM3 and PGM4 on the main panel, and the first two PGM outputs on the PC5208. If you use
both the main panel and the PC5208 outputs, PGM3 will work the same as the first PC5208 output, and PGM4 will work the same as the sec-
ond PC5208 output.
[011] PGM 11 to PGM 14 Output Programming (PC5204)
Program PGM Option Attributes in sections [501] - [514]. Program PGM partitions in sections [551] - [564]
Default
01 PGM 11
I_______I_______I
01 PGM 12
I_______I_______I
Other System Options
[012] Keypad Lockout Options
If Keypad Lockout is active, the panel cannot be disarmed with a keyswitch.
Default
000 Number of Invalid Codes Before Lockout (001-255 codes)
I_______I_______I_______I
000 Lockout Duration (001-255 minutes)
I_______I_______I_______I
30
[007] Master Code
Default
1234
I_______I_______I_______I_______I
18 Stay Armed Status
19 Command Output #1 ([*][7][1])
Command Output #2 ([*][7][2])
20
Command Output #3 ([*][7][3])
21
Command Output #4 ([*][7][4])
22
23 24 Hour Silent Input
24 24 Hour Audible Input
25 Delayed Fire and Burglary Output
26 Battery Test Output
28 Holdup Output
Zone Follower Output (Zones 1-8)
30 Partition Status Alarm Memory
31 Alternate Communicator
32 Open After Alarm
33 Bell Status and Programming Access Output
34 Away Armed with no Zone Bypassed Status
35 Zone Follower Output (Zones 9-16)
Default
01
01
01
01
Default
01 PGM 13
I_______I_______I
01 PGM 14
I_______I_______I
WWW.DIYALARMFORUM.COM
[008] Maintenance Code
Default
AAAA
36
37
38
39
40
41
Default
10 PGM 2
I_______I_______I
PGM 7 (PC5208)
I_______I_______I
PGM 8 (PC5208)
I_______I_______I
PGM 9 (PC5208)
I_______I_______I
PGM 10 (PC5208)
I_______I_______I
I_______I_______I_______I_______I
Zone Follower Output (Zones 17-24
Zone Follower Output (Zones 25-32)
Zone Follower Output (Zones 33-40)
Zone Follower Output (Zones 41-48)
Zone Follower Output (Zones 49-56)
Zone Follower Output (Zones 57-64)
Output types [03] and
[20] cannot be used
together on the same
system.