Installing Mini-Slot Interface Connections - Eaton 93E Operation Manual

4.6.3 Installing Mini-Slot Interface Connections

NOTE
LAN drop for connection to UPS communications card is to be supplied by customer.
For installation and setup of an Mini-Slot card, contact an Eaton service representative (see paragraph 1.8)
To install wiring:
1. If not already installed, install the LAN drop.
2. Route and install the LAN and other cables to the appropriate Mini-Slot cards. See Figure 4-2 and Figure 4-3
for Mini-Slot communication bay locations.
3. Refer to the manual supplied with the Mini-Slot card for operator instructions.
Eaton 93E UPS (300/400 kVA, 380/400/415V) Installation and Operation Manual
UPS System Installation
4-9