Restoring The Factory Settings (Factory Reset) - Roland GT-100 Owner's Manual

Restoring the Factory Settings (Factory Reset)

Restoring the GT-100's system settings (System parameters) to their
original factory default settings is referred to as "Factory Reset. "
Not only can you return all of the settings to the values in effect
when the GT-100 was shipped from the factory, you can also specify
the items to be reset.
* When you execute "Factory Reset, " the settings you made will
be lost. If you want to keep your data, you must save it on a
computer as described in "Transmitting Data to an External MIDI
Device (Bulk Dump)" (p. 48).
* PEDAL CALIBRATION won't be initialized as the result of a
"Factory Reset" (p. 36).
1.
Press the [SYSTEM] button .
2.
Turn knob [4] to select "FACTORY RESET . "
3.
Use knobs [5] and [8] to specify the areas that will be
returned to their factory-set state .
Knob Parameter Value
SYSTEM
[5] FROM
QUICK
[8] TO
U01-1–U50-4
50
Explanation
System parameter settings
Settings for User Quick
Setting
Settings for Patch Number
U01-1 through U50-4
4.
Press the [WRITE] button .
5.
To execute the Factory Reset, press the [WRITE] button .
When the Factory Reset is completed, you'll be returned to the Play
screen.
If you decide to cancel without executing, press the [EXIT] button.