Selecting The Connector That Will Receive Midi; Messages; Sending Program Change Messages; Enabling/Disabling The Program Change Map Settings - Roland GT-100 Owner's Manual

Parameter Value
Selecting the Connector That Will Receive MIDI Messages
This selects whether MIDI messages will be received from the MIDI IN connector or from the USB port.
MIDI IN SELECT
USB (AUTO)
MIDI CONNECTOR

Sending Program Change Messages

This setting determines whether or not Program Change messages are output when patches are switched on the GT-100.
PC OUT
* On the GT-100, Bank Select messages are output simultaneously with Program Change messages.
OFF
ON
Enabling/Disabling the Program Change Map Settings (MIDI Map Select)
This setting determines whether patches are switched according to the Program Change Map settings, or to the default settings
"Setting the Program Change Map" (p. 47).
MAP SELECT
FIX
PROG
Sending [PHRASE LOOP] Pedal Operations as Control Change Messages
This sets the controller number when [PHRASE LOOP] pedal switch operation data is output as Control Change messages.
PH .LOOP OUT
OFF
CC#1–CC#31, CC#64–CC#95
Sending [ACCEL/CTL] Pedal Operations as Control Change Messages
This sets the controller number when [ACCEL/CTL] pedal switch operation data is output as Control Change messages.
ACC/CTL OUT
OFF
CC#1–CC#31, CC#64–CC#95
Sending [EXP] Pedal Operations as Control Change Messages
This sets the controller number when [EXP] pedal operation data is output as Control Change messages.
EXP OUT
OFF
CC#1–CC#31, CC#64–CC#95
Sending EXP Pedal Sw Operations as Control Change Messages
This sets the controller number when EXP PEDAL SW operation data is output as Control Change messages.
EXP SW OUT
OFF
CC#1–CC#31, CC#64–CC#95
Sending External Footswitch Operations as Control Change Messages
This sets the controller number when operation data from the footswitch connected to the SUB CTL 1, 2/SUB EXP jack is output as Control Change
SUB CTL1 OUT

messages.

OFF
CC#1–CC#31, CC#64–CC#95
OFF
SUB CTL2 OUT
CC#1–CC#31, CC#64–CC#95
Making Global Settings (System Settings)
Explanation
MIDI messages will be received via the USB port.
* If the USB port is not connected to a computer, MIDI messages will be received from the MIDI IN
connector.
MIDI messages will be received from the MIDI IN connector.
Program Change messages are not output, even when patches are switched.
Program Change messages are simultaneously output when patches are switched.
This deactivates the Program Change Map.
Switches to the patches according to the default settings.
This activates the Program Change Map.
Switches to the patches according to the Program Change Map.
Control Change messages are not output.
This sets the controller number when [PHRASE LOOP] pedal operation data is output as Control

Change messages.

Control Change messages are not output.
This sets the controller number when [ACCEL/CTL] pedal operation data is output as Control Change
messages.
Control Change messages are not output.
This sets the controller number when [EXP] pedal operation data is output as Control Change
messages.
Control Change messages are not output.
This sets the controller number when EXP PEDAL SW operation data is output as Control Change
messages.
Control Change messages are not output.
This sets the controller number when SUB CTL1 pedal operation data is output as Control Change
messages.
Control Change messages are not output.
This sets the controller number when SUB CTL2 pedal operation data is output as Control Change
messages.
45