Table of Contents
Advertisement
Quick Guide
3
Editing: Basic Operation
Editing on the GT-100 is extremely simple; the procedure is always the same. Please take
1
a moment to learn the basic operations.
Choose what you're going to edit
Press one of the following buttons .
Effect
Here you can edit the parameters of each effect.
EZ (Easy) Tone
Here you can create the desired tone simply by
choosing a musical style and the type of song you
have in mind. You can also customize the amp and
overdrive/distortion settings in an intuitive way.
2
Select an item
Use
to select an item shown in the left
display .
The screen shown here is an example of when you've pressed
the [EFFECT] button.
3
Edit the values
Use
shown in the right display .
If page tabs are shown in the screen, you can use the
[PAGE] buttons to move between tabs.
4
Exit the settings
Press
You'll be returned to the Play screen.
NOTE
The settings you've edited will be lost when you switch patches. If you want to keep the edited settings, you must save them as a user patch.
Next Page
12
page 16
page 14
to edit the values
.
System
Here you can make settings that apply to the
entire GT-100, such as output settings and
phrase loop settings.
Control/Expression
Here you can assign the desired functions to the
[ACCEL/CTL] pedal, [EXP] pedal, and external
pedals.
Turn knob [4] to select the
desired item (the cursor will
move).
Turn the knobs
to edit the
values.
page 40
page 33
Advertisement
Table of Contents
