Table of Contents
Advertisement
Phrase Loop Play
Phrase Loop is a recorder function that lets you record up to 38
seconds (when using monaural recording) of audio, and play it
back by operating a pedal. By layering sounds as you continue
real-time recording and playback, you can create a wide variety of
performances.
You can record a phrase loop with effects, or you can add effects
after a loop has been recorded. Adding effects after-the-fact lets
you create special effects with recorded performances.
* Recorded phrases are deleted when Phrase Loop is switched off
or when the power is turned off.
Reference
For more about Phrase Loop operation, refer to "Advanced:
Phrase Loop" (p. 18).
Setting Phrase Loop
Phrase Loop offers a variety of modes. By changing the settings, you
can use this function in various ways.
Setting procedure
1.
Press the [SYSTEM] button .
2.
Turn knob [4] to select "PHRASE LOOP" in the left display .
3.
Use knobs [5]–[8] to select the desired settings .
32
Parameter
Value
Page 1
PERFORM
[5]
MODE
PATCH EDIT
MONO
[6]
REC MODE
STEREO
[7]
PLAY LEVEL
0–120
OFF
[8]
PEDAL FUNC
PHRASE LOOP
4.
Press the [EXIT] button to return to the Play screen .
Explanation
The sound processed by the
effects will be recorded.
This lets you create a variety
of performances by layering
different sounds.
The sound before being
processed by the effects will be
recorded, and the effects will
be applied when the loop is
played back.
This is a convenient way
to adjust the effects, or to
compare the sound of different
patches.
The phrase will be recorded
in monaural (maximum 38
seconds).
The phrase will be recorded in
stereo (maximum 19 seconds).
Specifies the phrase playback
volume.
Phrase Loop will not operate
even if you press the [PHRASE
LOOP] pedal.
You can use the [PHRASE
LOOP] pedal to switch Phrase
Loop on/off or to record.
Advertisement
Table of Contents
