Assigning The Exp And Sub Exp Pedal Functions - Roland GT-100 Owner's Manual

Pedal Settings (Control/Expression)
Assigning the EXP and SUB EXP Pedal
Functions
Here's how to assign the parameters that will be controlled by the
GT-100's built-in [EXP] pedal, and by an expression pedal (such as
the separately available EV-5) connected to the SUB CTL 1, 2/SUB
EXP jack.
1.
Press the [CTL/EXP] button .
2.
Turn knob [4] to select the pedal whose assignment you
want to specify .
Parameter
EXP PEDAL
SUB EXP PEDAL
34
Explanation
The GT-100's [EXP] pedal
The expression pedal (such as the
separately available EV-5) connected to
the SUB CTL 1, 2/SUB EXP jack
3.
Use knob [5] to select the setting .
Parameter Value
OFF
FOOT VOLUME Foot volume will be assigned.
PEDAL BEND
WAH
PB/FV
[5] FUNC
WAH/FV
PATCH LEVEL
PATCH LEVEL
[6] 0–200
MIN
PATCH LEVEL
[7] 0–200
MAX
* Only FOOT VOLUME can be assigned to SUB EXP (external
expression pedal). If you want to assign a function other than
FOOT VOLUME, use Assign (p. 37).
4.
Press the [EXIT] button to return to the Play screen .
Explanation
No assignment.
Pedal bend will be assigned.
Wah will be assigned.
Pedal bend and foot volume will be
assigned.
Wah and foot volume will be
assigned.
Patch level will be assigned.
* This is shown only if PERFOR-
MANCE is set to SYSTEM.
Specifies the minimum value.
* This is shown only if FUNC is set
to PATCH LEVEL.
Specifies the maximum value.
* This is shown only if FUNC is set
to Patch Level.