Skoda Superb 2014 Owner's Manual page 84

Memory function of the electrically adjustable seat

Read and observe on page 79 first.
The memory function for the driver's seat provides the option to store the po-
sitions of the driver's seat and the external mirrors. Each of the three memory
buttons » Fig. 70 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig.
SET A
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage.
Saving front passenger mirror settings when reversing
Above the MAXI DOT display in the menu item Mirror down. The lowering func-
tion for the mirror on the passenger side when reversing must be ena-
bled » page 45.
›
Switch on the ignition.
›
Press the required memory button
›
Turn the knob for the external mirror control to the position for the passen-
ger side mirror adjustment » page
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position
›
Disengage reverse gear.
The set position of the exterior mirror is stored.
Retrieving the saved setting
›
Briefly press the desired memory button
82
Operation
Fig. 70
Memory buttons and SET button
» page 78.
70.
button, press the desired memory
SET
» Fig. 70.
B
78.
» page
» Fig. 70 with the ignition on.
B
or
›
Press and hold the desired memory button
the ignition is on and travelling at a speed of more than 5 km / h.
Stopping the ongoing adjustment
›
Press any button on the driver's seat or the button
key.
Note
Each time new seat and exterior mirror settings for forward travel are saved,
the individual setting for the right exterior mirror for reverse travel must also
be saved again.
Memory function of the remote control key

Read and observe
The automatic storage of the driver's seat and exterior mirror positions when
locking the vehicle can be turned on in the memory of the remote control key
(afterwards only as function of automatic storage).
Enable automatic storage
›
Unlock the vehicle with the remote control key.
›
Press and hold any memory button
has assumed the position stored under this button, at the same time press
the button on the remote control key within 10 seconds.

The successful activation of the automatic storage function for each key is
confirmed by an acoustic signal.
Storing seat and exterior mirror settings for driving forward
›
Enable automatic storage.
78.
with the ignition off or when
B
on the remote control

on page 79 first.
» Fig. 70 on page 82. After the seat
B
