Replacing bulb for main beam
Fig. 202 Headlights with Xenon light: Changing the bulb for the main
beam
Read and observe
and
›
Unlock the protective cap in the direction of arrow
›
Turn the plug with bulb
anti-clockwise to the stop and remove it.
C
›
Change the bulb.
›
Insert the bulb holder with the new bulb and turn in an anti-clockwise direc-
tion as far as the stop.
›
Insert the protective cap in holder
The protective cover must engage firmly.
Replacing the bulb for the fog light
Fig. 203 Front bumper: Remove the protective grille/fog light
on page 219 first.
» Fig. 202
1
and carefully push in.
2
Read and observe
Removing the protective grille
›
Undo the protective grille in the area of the arrow
clamp for removing the wheel trims
›
Remove the protective grille in the direction of the arrow
Changing light bulbs for fog lights
and remove.
›
Use the screwdriver from the tool kit to unscrew the fog lamp
›
Remove the headlight in the direction of arrow
›
Remove the connector.
›
Turn bulb holder
and remove.
›
Insert the bulb holder with the new bulb into the headlight and turn in a
clockwise direction as far as the stop.
›
Fit the connector.
›
Replace the fog lamp by inserting it in the opposite direction of the arrow
» Fig. 203
2
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Fig. 204
Replacing the light bulb
and
on page 219 first.
» page
201, Vehicle tool kit.
» Fig. 204
in an anti-clockwise direction up to the stop
A
- and screw tight.
» Fig. 203
- using the
.
1
» Fig. 203
- .
.
2
221
Fuses and light bulbs