Skoda Superb 2014 Owner's Manual page 199

›
Switch on the ignition.
›
Press the  » Fig. 170 symbol button for longer than 2 seconds.
If the warning light in the instrument cluster lights up and does not go out

after the system configuration, this indicates a system fault.
If the warning light in the instrument cluster flashes, there is a system fault.

Tyre pressure indicator
The warning light in the instrument cluster lights up when any of the fol-

lowing conditions are met.
›
The tyre inflation pressure is low.
›
The structure of the tyre is damaged.
›
The vehicle is loaded on one side.
›
The wheels of one axle are loaded more heavily (e.g. when towing a trailer or
when driving uphill or downhill).
›
Snow chains are mounted.
›
The spare wheel is mounted.
›
One wheel per axle was changed.
WARNING
When the warning light in the instrument cluster lights up, immediate-
■ 
ly reduce the speed and avoid sudden steering and brake manoeuvres.
Stop the vehicle as soon as possible and inspect the tyres and their infla-
tion pressure.
Under certain circumstances (e.g. sporty style of driving, wintry or un-
■
paved roads) the warning light
or does not light up at all.
CAUTION
The system cannot warn in case of very rapid tyre inflation pressure loss, e.g.
■
in case of sudden tyre damage. In this case carefully bring the vehicle to a
standstill without sudden steering movements or sharp braking.
To ensure a proper functioning of the tyre control display, it is necessary to
■
repeat the basic setting every 10000 km or once a year.
The tyre pressure monitor does not replace the need to check tyre pressure
■
regularly.
in the instrument cluster can be delayed

Spare and temporary spare wheel

Read and observe and
The spare or temporary spare wheel is located in a well under the floor cover-
ing in the boot and is fixed in place with a special bolt
Take out the wheel
›
Open the tailgate.
›
Raise the floor covering in the boot
›
Remove the box with the tool kit.
›
Unscrew the nut » Fig. 171 anticlockwise.
›
Take out the wheel.
Stow the wheel
›
Place the wheel into the spare wheel well with the wheel rim pointing down-
ward.
›
Screw on the nut » Fig. 171 clockwise until the wheel is safely secured.
›
Place the box with the tool kit back into the spare wheel and secure it with
the tape.
›
Fold back the floor in the luggage compartment.
›
Close the boot lid.
Fit a wheel in the appropriate dimensions and design as soon as possible.
If the dimensions or design of the spare wheel differ from the tyres fitted to
the vehicle (e.g. winter tyres or low-profile tyres), it must only be used briefly
in the event of a puncture and if an appropriately cautious style of driving is
adopted » .
Temporary spare wheel
A warning label is displayed on the rim of the temporary spare wheel.
Fig. 171
Fixing the spare or temporary
spare wheel
on page 193 first.
» Fig. 171.
» page 98.
Wheels

197