Switch the intensive windscreen heater on/off
Air flow to the windows
Air flow to the upper body
Air flow in the footwell
Switching the rear window heater on/off
Control the seat heater on the front left seat
Switching automatic mode on
Switching Climatronic system off
Switch the cooling system on/off
Switch the temperature setting in Dual mode on/off
Control the seat heater on the front right seat
Note
Do not stick anything on or cover the interior temperature sensor
wise it could have an unfavourable effect on the Climatronic.
automatic mode
The automatic mode is used in order to maintain a constant temperature and
to demist the windows in the interior of the car.
Recommended setting for all periods of the year
›
Set the required temperature between +18 °C and +26 °C: we recommend 22
°C.
›
Press the
» Fig. 125
on page 113 button.
›
Set the air outlet vents 2 and 3
directed slightly upwards.
After pressing, an indicator light in the top right or left corner of the button
lights up, depending on which mode was last selected.
If the warning light in the top right corner of the button lights up, the Cli-
matronic operates in "HIGH"-mode.
The "HIGH" mode is the standard setting of the Climatronic.
When pressing the button again, the Climatronic switches to "LOW"-mode
and the indicator light in the top left corner lights up. The Climatronic uses on-
ly in this mode the lower blower speed. However taking into account the noise
level, this is more comfortable, yet be aware that the effectiveness of the air
conditioning system is reduced particularly if the vehicle is fully occupied.
By pressing the button again, it is changed to "HIGH"-mode.
114
Operation
» page 73
» page 83
» page 114
» page 114
» page 114
» page 83
» Fig. 122
on page 108 so that the air flow is
Automatic mode can be switched off by pressing one of the buttons for the air
distribution or by increasing/decreasing the blower speed.
Switching the cooling system on/off
›
Press the button .
The indicator light in the button lights up.
›
Press button . once more.
The indicator light in the button goes out.
After the cooling system is switched off, only the ventilation and heating func-
tion remains active whereby the minimum temperature that can be reached is
the outside temperature.
, other-
E
Setting the temperature
The interior temperature for the left and right side can be set separately or to-
gether.
For both sides
›
Turn the control dial
or decrease the temperature.
The indicator light in the button lights up.
For the right side
›
Turn the control dial
or decrease the temperature.
The indicator light in the button lights up.
If the warning light in the symbol button is lit, the temperature for both
sides cannot be set with the control dial
pressing the symbol button . The indicator light in the button goes out.
The interior temperature can be set between +18 °C and +26 ℃. The interior
temperature is regulated automatically within this range.
If a temperature lower than +18 °C is selected, a blue symbol lights up at the
start of the numerical scale.
If a temperature higher than +26 °C is selected, a red symbol lights up at the
start of the numerical scale.
At both end positions, Climatronic functions at maximum cooling/heating out-
put and the temperature is not regulated.
» Fig. 125
on page 113 to the left or right to increase
A
» Fig. 125
on page 113 to the left or right to increase
D
. This function can be restored by
A