Replacing the bulb for the licence plate light
Fig. 205 Remove the number plate light/replace the bulb
Read and observe
and
›
Open the boot lid.
›
Push in the lamp in the direction of the arrow
The lamp comes loose.
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
Check that the light is securely inserted.
Rear light (Superb Combi)
Fig. 206 Removing: Cover/light
222
Do-it-yourself
on page 219 first.
» Fig.
205.
1
and remove it.
2
.
1
Fig. 207 Seal expand / lighting connector
Read and observe
Removing
›
Open the tailgate.
›
Insert the clamp for removing the wheel trims
into the hole at the position indicated by the arrow
›
Remove the cover in the direction of the arrow
›
Use the screwdriver from the tool kit to unscrew the lamp
›
Grasp the rear light and carefully remove away from the direction of travel.
.
3
›
Remove the rubber seal in the direction of arrow
›
Pull off the cable bundle with the plug cap
›
Press together the interlocks on the connector in the direction of arrow
» Fig. 207
- .
2
›
Carefully remove the connector from the tail lamp assembly in the direction
of the arrow
.
3
Fitting
›
Insert the connector into the lamp and lock it securely.
›
Install the rubber seal in the body in the opposite direction to arrow
stall
» Fig. 207
- .
›
Insert the tail lamp with the holes
on the body
» Fig. 207
›
Carefully press the tail light into the bolts on the bodywork.
Be careful not to pinch the cable bundle between the bodywork and light.
›
Screw the tail lamp into place and install the cover.
›
Ensure that the cover engages firmly.
and
on page 219 first.
» page
201, Vehicle tool kit
» Fig. 206
» Fig. 206
» Fig. 207
1
» Fig. 207
- .
» Fig. 208
on page 223 into the bolts
1
- .
- .
- .
» Fig. 206
- .
- .
in-
1