Instruction
To use ON TIMER operation
•
1. Press "ON TIMER button".
2. Press "TIMER Setting button" until the
3. Press "ON TIMER button" again.
The TIMER lamp lights up.
To cancel ON TIMER operation
4. Press "CANCEL button".
The TIMER lamp goes off.
To combine ON TIMER and OFF TIMER
•
ATTENTION
•
•
•
64
Check that the clock is correct. If not, set
the clock to the present time. (page 9.).
is displayed.
blinks.
time setting reaches the point you like.
•
Every pressing of either button
increases or decreases the time setting
by 10 minutes. Holding down either
button changes the setting rapidly.
A sample setting for combining the two timers is shown below.
(Example)
Present time: 11:00 PM
(The unit operating)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m.
Combined
In the following cases, set the timer again.
After a breaker has turned OFF.
After a power failure.
After replacing batteries in the remote controller.
C
HOME LEAVE
ON/OFF
TEMP
POWERFUL
MODE
FAN
SWING
SILENT
SENSOR
ON
CANCEL
OFF
TIMER
System Configuration
SiBE05-311
1.3
4
2