SiBE05-311
2.8
HOME LEAVE Operation
HOME LEAVE operation is a function which
allows you to record your preferred
temperature and air flow rate settings.
To start HOME LEAVE operation
1. Press "HOME LEAVE button"
•
To cancel HOME LEAVE operation
2. Press "HOME LEAVE button" again.
•
Before using HOME LEAVE operation.
System Configuration
The HOME LEAVE lamp lights up.
The HOME LEAVE lamp goes off.
To set the temperature and air flow rate for HOME LEAVE operation
•
When using HOME LEAVE operation for the first time, please set the temperature and
air flow rate for HOME LEAVE operation. Record your preferred temperature and air
flow rate.
Initial setting
temperature
Cooling
25°C
Heating 25°C
1. Press "HOME LEAVE button". Make sure "
display.
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use this function.
To change the recorded information, repeat steps 1 – 3.
Air flow rate
temperature
AUTO
18-32°C
AUTO
10-30°C
" is displayed in the remote controller
" or "
" as you like.
C
HOME LEAVE
ON/OFF
TEMP
POWERFUL
MODE
FAN
SWING
SILENT
SENSOR
ON
CANCEL
OFF
TIMER
Selectable range
Air flow rate
5 step, AUTO and SILENT
5 step, AUTO and SILENT
Instruction
1, 2
l
61