Hardware Installation; Installing Hard Disk - Planet NVR-820 User Manual

ON
Power
OFF
Restore
Reset default
Restart
Buzzer
STOP
Stop
Buzzer Status
Complete
start
Initiating
Beep
restart
Initiating
shutdown
Real Panel
Connector Description
Ethernet 10 / 100 / 1000Mbps network.
USB Connect your USB flash disk for firmware upgrade and backup.
Video VGA / HDMI
Audio Line in / Line out / Mic
Power Supply 100~240V AC, 1.4A / Max. 50 / 60Hz

2.2 Hardware Installation

2.2.1 Installing Hard Disk

1 . Remove the screws on both sides (1 on each side) and remove the top case by pulling it
toward you.
Network Video Recorder with HDMI
Press and hold for 2 seconds
Press and hold for 2 seconds
Press and hold for 5 seconds
Press and hold for 2 seconds
Press and release to stop buzzer right away
Definitions
Beep once ( indicating the system is fully started)
Beep once (Indicating the restart process has begun)
Beep once (Indicating users to release the Power butto
as the shutdown process has begun)
12
NVR‐820 / NVR‐1620
n