Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
9.3 Event Servers
9.3.1 Configuring an FTP Server
Event servers are to be used with event trigger actions. In case of unusual motion detected by
the camera or a disk failure, the recorder can send notification with the acceptable format
(image/txt) to a destined event server according to the configuration.
To add an FTP server,
1. Start by giving a name to the server that you are adding to the recorder.
2. Enter the host name or the IP address of the FTP server.
3. Enter the communication port of the FTP server (usually port 21).
4. Enter the user name and password of the FTP server if it's required.
5. Check "Use Passive Mode" if it's required or leave it unchecked to use active mode.
69