Planet NVR-820 User Manual page 28

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
Cameras found should be listed and simply select a camera from the list and press "Configure"
Its corresponding information should be displayed in the "Camera Information" section. Enter its
username and password and select the channel ID and name the camera.
Click on "Detect" to establish connection between the recorder and the camera. If connection
establishes successfully, camera's detailed information should be polled and displayed as
shown below. Adjust its video format, frame rate, resolution or bitrate, etc. if you wish and then
click "Add" to finish adding the camera
28