Table of Contents
Advertisement
TRX-MHV
SSW OFF
TRX-HL
TRX-AZI
TRX-REV
TRX-TRIGER
TRX-VIDEO
PRC-HL
PRC-AZI
PRC-TRIGER
PRC-VIDEO
3.7.5 Clearing the error log [ALARM ACK]
Take the following steps to clear the error log.
(a) Hold down [ALARM ACK] key to display the ALARM menu.
(b) Select ERROR LOG CLR , and then press [JOG DIAL] or [ACQ/ENT] .
(c) The menu below is displayed. Turn [JOG DIAL] to select ON , and then press the [JOG
DIAL] or [ACQ/ENT] key to determine the selection.
3.7.6 Operating the self-diagnostic function [MENU]
The self-diagnostic function is installed to activate the self-diagnostic mode after the power is
turned on.
This function gets the system to automatically diagnose itself for normal operation.
Take the following step to start the self- - - - diagnostic function:
Take the following step to start the self
Take the following step to start the self
Take the following step to start the self
(a) Turn on the power while pressing the [EBL] and [VRM] keys at the same time.
The self-diagnostic function starts.
3.7.7 Displaying the help menu
The HELP function is installed to explain keys for operating special functions when the power is
turned on.
Take the following steps to operate the HELP function:
Take the following steps to operate the HELP function:
Take the following steps to operate the HELP function:
Take the following steps to operate the HELP function:
(a) Hold down the [MENU] key to display MENU .
(b) Operate [JOG DIAL] to select HELP , and then press the [JOG DIAL] or [ACQ/ENT] key.
As shown below, the keys for operating special functions are displayed in two lists when
the power is turned.
Moduration error of transmitter or reciever
Safety switch OFF of scanner unit
Standard rotation signal error of scanner unit
Rotation signal error of scanner unit
Reverse rotation error of scanner unit
Transmission trigger error of scanner unit
Video error of scanner unit
Standard rotation signal error of display unit
Rotation signal error of display unit
Trigger signal error of display unit
Video signal error of display unit
ALARM
BUZZER
>
ERROR LOG CLR
OFF
ON
diagnostic function:
diagnostic function:
diagnostic function:
82
Advertisement
Table of Contents
