Confirming Error Logs [Alarm Ack] - JRC JMA-5104 Instruction Manual

3.7.4 Confirming error logs [ALARM ACK]

If any of the sensors malfunctions, the error log function lists faulty locations.
If a failure occurs, inform our engineer of the error log contents as well as details on the failure.
Take the following steps to confirm error logs: Take the following steps to confirm error logs: Take the following steps to confirm error logs: Take the following steps to confirm error logs:
(a) Hold down the [ALARM ACK] key to display the ALARM menu.
(b) Select ERROR LOG , and then press the [JOG DIAL] or [ACQ/ENT] key.
Error logs are displayed as shown below.
Error list
When a error occurs, the following error is displayed at the lower right of the screen, and is
saved in the error log.
When you connect to our company or an agency, tell contents of the error log at the time of
failure.
TRX
TRX-DATA
PANEL
PANEL DATA
PANEL2
PANEL2 DAT
GPS
GPS DATA
GPS STATUS
COMPASS
COMP DATA
PC
PC DATA
NSK
NSK DATA
GYRO
LOG
GPS COMP
GCOMP DATA
TRX-HEATER
ERROR LOG
BACK
CPA/TCPA 1
GZ 3
LOST 2
PRC-TRIGER 1
NEXT
No communication error with transmitter or receiver
Data error with transmitter or receiver
No communication error with control unit
Data error with control unit
No communication error with subcontrol unit
Data error with subcontrol unit
No communication error with GPS equipment
Data error with GPS equipment
Status error with GPS equipment
No communication error with magnetic compass equipment
Data error with magnetic compass equipment
No communication error with personal computer
Data error with personal computer
No communication error with NSK unit
Data error with NSK unit
Status error with NSK unit
Status error with NSK unit
No communication error with GPS compass
Data error with GPS compass
Heater error of transmitter or reciever
81