Assignment Of Functions To User Buttons; Tally Lamp - JVC GY-LS300CHU Instructions Manual

Assignment of Functions
to User Buttons
You can assign functions to the following buttons
and use them as user buttons.
By assigning functions to the buttons, the usability
of the camera recorder can be enhanced.
Perform settings in the menu items corresponding
to each button.
Button
[F.ASSIST/1] Button
[TC/2] Button
[LOLUX/3] Button
[C.REVIEW/4] Button
[ZEBRA/5] Button
[MARKER/6] Button
[REC/7] Button
[EXPANDED FOCUS/8] Button
[AWB/9] Button
[LOCK/10] Button
LCD Cross-Shaped Button (J)
LCD Cross-Shaped Button (K)
LCD Cross-Shaped Button (H)
LCD Cross-Shaped Button (I)
.
1 Assign functions to the buttons from the
menu.
Set items in [Main Menu] B [Camera Function]
B [User Switch Set] B [USER1]-[USER10],
[LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD
KEY◀].
(A P99 [User Switch Set Item] )
38

Assignment of Functions to User Buttons

Memo :
Operations of the user buttons are interlocked
0
with the menu settings.
When the menu screen is displayed, these
0
buttons function as the menu operation buttons.
(A P93 [Basic Operations in Menu Screen] )
Some assigned functions cannot be used
0
depending on the lens used.
Functions that cannot be used will be grayed out
on the user button functions page of the status
screen.
Menu Item
(A P137 [Status Screen] )
[USER1]
[USER2]
[USER3]

Tally Lamp

[USER4]
[USER5]
This is the indicator lamp for recording and
[USER6]
warning.
The operation changes according to the menu
[USER7]
settings.
[USER8]
The lamp blinks when the battery or remaining
[USER9]
space on the SD card is low. (Camera mode only)
[USER10] * Specify the setting in [Main Menu] B [System]
B [Tally Lamp].
[LCD KEY▲]
(A P115 [ Tally Lamp ] )
[LCD KEY▼]
[LCD KEY◀]
[LCD KEY▶]
Handle Tally
.
Menu setting
Functional
information
Recording status
R : Lights up
J : Blinks four times in 1 second
o : Blinks once in 1 second
* Paused state during special recording ([Clip
Continuous]).
(A P80 [Clip Continuous Rec] )
Memo :
Blinking takes priority over lighting up.
0
Lamp
[Tally Lamp]
Warning
Caution
Recording
Special recording *
Tally Lamp
(Front)
Off On
-
J
-
o
-
R
-
R