Table of Contents
Advertisement
Symptom
The time code and user's bit
are not displayed.
The date and time are not
displayed.
Incorrect display on the
viewfinder.
The actual recording time is
shorter than the estimated
time.
Cannot connect to wireless
LAN.
The View Remote screen turns
black.
The screen flickers.
The screen freezes.
Cannot perform remote
operation.
The clips cannot be uploaded
to the FTP server.
The wireless LAN is
disconnected.
The images and audio sound
during live streaming are
choppy.
The focus position cannot be
changed using the camera unit
during manual focus when
using a lens without a focus
ring.
Even in Camera mode or Media mode, the time code and user's bit
0
may not be displayed depending to the type of display.
Is [LCD/VF] B [Display Settings] B [TC/UB] set to "Off"? To display
0
the time code or user's bit, set it to "TC" or "UB".
(A P109 [ TC/UB ] )
The date and time are only displayed on the Display 1 and Display 2
0
screens in the Camera mode (during shooting).
(A P129 [Display Screen in Camera Mode] )
Is [System] B [Record Set] B [Time Stamp] set to "On"? To display
0
the date and time, set it to "Off".
(A P119 [ Time Stamp ] )
Is [LCD/VF] B [VF SW] set to "Enable", and is the viewfinder in use
0
without being pulled out?
To use the viewfinder in this setting, pull out the viewfinder.
(A P106 [ VF SW ] )
The recordable time may be shorter depending on the shooting
0
conditions or the subject.
Check the mode of connection and method of setting ([SSID] and
0
[Passphrase] in cases other than WPS).
(A P146 [Connecting via Wireless LAN] )
Even if the Passphrase is wrong, "Completed the Setup Wizard.
0
Please Input the Passphrase into Your Device." may appear at the
browser setting depending on the type of encryption.
Adjust [Passphrase] again.
The network path is congested.
0
Wait a while before refreshing (reloading) the web browser.
Adjust the [Clip Server] settings.
0
(A P124 [ Clip Server ] )
The maximum size of the recorded clip is 64 GB.
0
If a file size limit is set in the FTP server settings, set the size limit to
more than 64 GB.
Take necessary action as described in "[List of FTP Transfer Errors]
0
(A P 174)".
The wireless LAN may be disconnected depending on the
0
environment. Change the usage environment.
Connect via wired LAN.
0
(A P148 [Connecting via Wired LAN] )
Depending on the type of network adapter used and the connection,
0
streaming may not be possible with the encoding bit rate specified.
Please reduce the encoding bit rate.
Setting [Main Menu] B [Camera Function] B [Grip Zoom] to "Focus"
enables focusing using the zoom lever at the grip.
(A P98 [ Grip Zoom F ] )
Action
Troubleshooting
179
Advertisement
Table of Contents
