Assignment Of Functions To User Buttons; Tally Lamp - JVC JY-HM360E Instructions Manual

Assignment of Functions
to User Buttons
You can assign functions to the following buttons
and use them as user buttons.
By assigning functions to the buttons, the usability
of the camera recorder can be enhanced.
Perform settings in the menu items corresponding
to each button.
Button
[FOCUS ASSIST/1] Button
[OIS/2] Button
[LOLUX/3] Button
[AE LOCK/4] Button
[ZEBRA/5] Button
[MARKER/6] Button
[C.REVIEW/7] Button
LCD Cross-Shaped Button (J)
LCD Cross-Shaped Button (K)
LCD Cross-Shaped Button (H)
LCD Cross-Shaped Button (I)
MENU/THUMB
CANCEL
FOCUS ASSIST/1 OIS / 2 LOLUX / 3
TIME CODE
.
1 Assign functions to the buttons from the
menu.
Set items in [Main Menu] B [Camera
Function] B [User Switch Set] B [USER1]-
[USER7], [LCD KEY▲], [LCD KEY▶], [LCD
KEY▼], [LCD KEY◀].
(A P90 [User Switch Set Item] )
34

Assignment of Functions to User Buttons

Menu Item
[USER1]
[USER2]
[USER3]
[USER4]
[USER5]
[USER6]
[USER7]
[LCD KEY▲]
[LCD KEY▼]
[LCD KEY◀]
[LCD KEY▶]
C.REVIEW/7
AE LOCK/4 ZEBRA/5 MARKER/6
Memo :
Operations of the user buttons are interlocked
0
with the menu settings.
When the menu screen is displayed, these
0
buttons function as the menu operation buttons.
(A P85 [Basic Operations in Menu Screen] )

Tally Lamp

This is the indicator lamp for recording and
warning.
The operation changes according to the menu
settings.
The lamp blinks when the battery or remaining
space on the SD card is low. (Camera mode only)
* Set using [Main Menu] B [System] B [Tally
Lamp].
(A P104 [ Tally Lamp ] )
.
Menu Setting
Functional Warning
information
Caution
Recording status Recording
Special recording *
R : Lights up
J : Blinks four times in 1 second
o : Blinks once in 1 second
* Paused state during special recording ([Clip
Continuous]).
(A P72 [Clip Continuous Rec] )
Memo :
Blinking takes priority over lighting up.
0
Tally Lamp Off On
-
J
-
o
-
R
-
R