Table of Contents
Advertisement
Basic Shooting
Procedures
Preparations
4
2
3
.
1 Supply battery or AC adapter power to the
camera recorder.
(A P28 [Power Supply] )
2 Insert an SD card.
(A P39 [SD Card] )
3 Turn on the power of the camera recorder.
Hold down the lock button (blue) at the center of
the [POWER ON/OFF] switch to set to "ON". The
camera recorder starts up in Camera mode and
is ready for recording.
4 Adjust the angle of the LCD monitor and
viewfinder.
(A P36 [Adjusting the LCD Monitor and
Viewfinder] )
Shooting
You can set to "FULL", "PRESET" or "OFF" using
the [AUTO MODE FULL/PRESET/OFF] switch.
When "FULL" is specified, the following video
0
items are automatically adjusted. (Auto mode)
Iris
0
Gain
0
Shutter
0
White balance
0
The audio recording level is also set to Auto in
4
the factory default, and audio from the built-in
microphone is recorded.
Specify whether or not to set the audio to Auto
in [Main Menu] B [A/V Set] B [Audio Set] B
[Audio On FULL AUTO].
(A P114 [ Audio On FULL AUTO ] )
When "PRESET" is specified, the settings
0
selected in [PRESET AUTO] is used.
1
(A P101 [PRESET AUTO Item] )
When "OFF" is specified, the button settings,
0
switch settings and selections in the menu are
used.
Memo :
To set each individual video setting item
0
automatically or manually, and to carry out the
audio input settings and the audio recording
level adjustment, refer to the following.
[Adjusting the Brightness] (A P 55)
0
[Adjusting the Iris F] (A P 56)
0
[Setting the Gain] (A P 58)
0
[Setting the Electronic Shutter] (A P 59)
0
[Adjusting the White Balance] (A P 61)
0
[Selecting Audio to Be Recorded in Each
0
Channel O] (A P 66)
[Adjusting the Audio Recording Level O]
0
(A P 67)
Basic Shooting Procedures
45
Advertisement
Table of Contents
