Setting Zebra Pattern - JVC GY-LS300CHU Instructions Manual

1 Set [Main Menu] B [TC/UB] B [UB Mode] to
"Preset", and press the Set button (R).
(A P105 [ UB Mode ] )
The [UB Mode] setting screen appears.
TC/UB
UB Mode
Preset
.
Memo :
When [TC/UB] B [TC Generator] is set to
0
"Regen", the parameter is displayed as "Regen"
and cannot be selected.
(A P105 [ TC Generator ] )
2 Select [Main Menu] B [TC/UB] B "Preset"
and press the Set button (R).
The [Preset] setting screen appears.
3 Use the cross-shaped button (HI) to place
the cursor at the item to set, then use the
cross-shaped button (JK) to change the
values.
Numbers between 0 and 9 or alphabets
between A and F can be specified for the user's
bit.
TC/UB
.
Memo :
Press the [C.REVIEW/4] button to reset each digit
0
to "0". The cursor moves to the left.
4 Check the values and press the Set button
(R).
The user's bit is set and the screen returns to
0
[TC/UB].
To cancel the setting, press the [CANCEL/
0
STOP] button.
5 Press the [MENU/THUMB] button.
Returns to the normal screen.

Setting Zebra Pattern

When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
2
.
1 Set the zebra display pattern.
Select the display pattern in [LCD/VF] B
[Shooting Assist] B [Zebra].
2 Specify the brightness (luminance) level
range for displaying zebra pattern.
Specify the upper and lower limits of the
luminance level in [LCD/VF] B [Shooting
Assist] B [Zebra] B [Top] and [Bottom].
Item
Top
Bottom
3 Display the zebra pattern.
Cursor
Press the [ZEBRA/5] button to display the zebra
pattern in the specified range.
.
Memo :
"Zebra" is assigned to the [ZEBRA/5] button in
0
factory default.
"Zebra" can also be assigned to other user
0
buttons.
(A P38 [Assignment of Functions to User
Buttons] )
Settings
Upper luminance 5% - 100%, Over
limit for displaying (in 5 % increments)
[Zebra]
Lower luminance 0% - 100% (in 5 %
limit for displaying increments)
[Zebra]
Setting the User's Bit
Options
73