Zoom Operation F - JVC GY-LS300CHU Instructions Manual

Zoom Operation F

Adjusts the angle of view.
Zooming can be operated using any of the three
levers/rings below.
Zoom Lever at the Grip
0
Zoom lever at the Handle O
0
Zoom ring on the commercially available lens
0
During the zoom operation, the zoom bar or
number will appear on the upper right corner of the
screen.
(A P132 [Zoom Display] )
Caution :
Depending on the zoom speed, the zoom drive
0
noise of the power zoom may be recorded.
.
Using the Zoom Lever at the Grip
1 Press the zoom lever to zoom.
The zoom speed changes according to the
0
extent the zoom lever is being pushed.
Zooms into wide angle and increases the
0
angle of view when "W" is pressed.
Zooms into telephoto and decreases the
0
angle of view when "T" is pressed.
Memo :
The zoom lever at the grip functions with the
0
power zoom lens. However, if the lens is set to
manual and depending on the lens used, the
zoom lever at the grip may not function.
When using a lens without focus ring, set [Main
0
Menu] B [Camera Function] B [Grip Zoom] to
"Focus" to enable focusing (in place of the zoom
operation) using the zoom lever at the grip.
(A P98 [ Grip Zoom F ] )
50
Zoom Operation F
Using the Zoom Lever at the Handle O
1 Set the zoom speed individually in [Main
Menu] B [Camera Function] B [Handle
Zoom Speed L]/[Handle Zoom Speed M]/
[Handle Zoom Speed H].
Set the zoom speed for "L", "M" and "H" of the
0
[ZOOM L/M/H] zoom speed switch
individually.
Increasing the value increases the zoom
speed.
(A P98 [Handle Zoom Speed L/Handle Zoom
Speed M/Handle Zoom Speed H F] )
Memo :
The zoom lever at the handle is disabled when
0
"Off" is selected.
The zoom lever at the handle functions with the
0
power zoom lens. However, if the lens is set to
manual and depending on the lens used, the
zoom lever at the handle may not function.
2 Set the [ZOOM L/M/H] zoom speed switch
to any of the settings.
3 Press the zoom lever at the handle to zoom.
The zoom operation is performed in the
0
speed that has been set.
Using Zoom Ring on the Commercially
Available Lens
You can adjust the preferred angle of view by
turning the zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1 Assign the "Preset Zoom1", "Preset
Zoom2", or "Preset Zoom3" function to any
of the user buttons.
(A P38 [Assignment of Functions to User
Buttons] )
(A P99 [USER1 to USER10, LCD KEY▲/LCD
KEY▶/LCD KEY▼/LCD KEY◀] )