Muratec F-315 Field Engineering Manual page 203

What you see on the LCD
Protect Doc. Stored
Scanner In Use
SecurityRx is Off
Select Paper Size
Sub-Address In Use
Toner Low
Too Many Characters
Too Many Locations
Too Many Steps
Use FBS Glass
What it means/What to do
A received document was in your fax's memory when you tried to turn off
the security reception passcode.
Print the received document from your fax's memory, then retry the
desired operation.
The command you're trying to enter requires the use of the scanner,
which is already in use.
Wait for the fax to complete the scan, then re-try the desired command.
You tried to turn the security reception on using a Soft key which is
assigned to set the security reception to on or off, but security reception
setting has not set to on.
To turn on or off the security reception using a Soft key, first set the
security reception setting to on.
You tried to make a copy in the following conditions:
•Paper size selection is set to "Auto".
•The bypass tray has the paper other than A4, A5
•Paper cassette(s) runs out of paper.
Press <Paper Size> to select your desired paper.
You tried to enter a sub-address identical to one already being used in
another F-Code box.
Enter a different sub-address.
Your machine is almost out of toner. About 100 more sheets can be
printed.
You attempted to enter too many numbers or other characters in the
current operation.
Press <Cancel> to delete the extra characters, then try again. You may
wish to review the operation's appropriate instructions.
You tried to enter too many numbers for a broadcast. You can enter up to
200 autodialer numbers and up to 30 numbers entered through the
numeric keypad.
Press <Cancel> to delete the extra numbers and then try again.
You tried to enter too many steps for a macro. You can enter up to 60
steps into a macro key.
You tried to enlargement copy using the ADF. Your machine cannot
enlargement copy from the ADF.
Please set your document on the FBS glass to make the enlargement
copy.
4-18
or F4.