Lcd Error Messages; Lcd Error Messages (Alphabetic List) - Muratec F-315 Field Engineering Manual

4.13 LCD Error Messages

Your fax machine's LCD messages can help you spot problems.

LCD error messages (Alphabetic list)

What you see on the LCD
All Commands In Use
Already Stored
Box In Use
Call For Service
Check Paper Size
Open&Close Top Cover
Close XXX Cover
Close 1st Cassette
Close 2nd Cassette
Communication Error
Copy Off
Document Full
Document Jam
ContStor Enter/Cancl
Document Stored
Drum Near End
Enter No. (0-32)
Enter No. (000-255)
What it means/What to do
Your fax machine has all of its 99 possible delayed commands
(automatic redialing counts as one) stored in memory and cannot accept
another.
Wait until your fax has completed one of the delayed commands or delete
an existing command by using <Job Confirm.>.
You tried to enter the same fax (or phone) number which is already
entered in your fax machine.
Enter a different fax (or phone) number.
You tried to erase a F-Code box which contains at least one document.
Erase the document(s), then try again.
The scanner lamp is dim or inoperable. Make repeated copies to help
evaporate any internal moisture.
The difference sized paper which is not same sized paper you told your
sized paper you told your machine is loaded.
Set correct sized paper or change the paper size setting.
The cover indicated on the LCD is open or has not been closed securely.
Close it properly.
The paper cassette indicated on the LCD is open or has not been
closed securely.
Close it properly.
A communication error disrupted the reception or transmission.
If you were transmitting, press stop to clear the error message and then
re-try the transmission. If you were receiving a fax, try to contact the
other person and have him/her re-try the transmission. (The problem may
be entirely with his/her machine, phone line, etc.)
You tried to change your fax machine to the copy mode, but the unit's
copy protection feature is on, preventing such use.
Turn off copy protection.
You tried to enter a document into an F-Code box, but the machine has
reached its capacity.
Delete documents stored in F-Code boxes until the machine will let you
proceed.
An original document jammed while you are using the ADF for either
faxing or copying.
You tried to erase a batch box which contains at least one document.
Erase the document(s), then try again.
Your machine can print about 500 more sheets, but your drum will need
to be replaced soon. Replace it.
You tried to enter a call group number greater than 32. Your machine can
maintain 32 call groups, numbered 1-32 (call group 0 covers all the
groups).
Determine the correct call group identifier number and enter it, instead.
If the optional NIC (network interface card) is attached to your machine,
and you tried to enter a TCP/IP address greater than 255.
Enter the correct TCP/IP address.
4-15