Glass Assembly; Air Shutter Setting - Heat & Glo FB-GRAND Owner's Manual

F. Glass Assembly
WARNING
Handle glass doors with care.
• Inspect the gasket to ensure it is undamaged.
• Inspect the glass for cracks, chips or scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass door removed,
cracked, broken or scratched.
• Replace glass door assembly as a complete appliance.
Removing Glass Assembly
There are two glass latches on the bottom of glass
assembly.
• To release glass assembly, pull latch forward and allow
to retract away from glass assembly.
• Remove glass assembly after both latches have been
released (see Figure 11.16).
Replacing Glass Assembly
Replace the glass door on the appliance. Fasten the latches
on the glass frame.
Heat & Glo • FB-IN, FB-GRAND • 783-908 Rev. J • 2/07
FIREBOX
SURROUND
LOCATING TABS
Figure 11.16 Glass Assembly
G. Air Shutter Setting
Optimal ame appearance is dependent on the air shutter
setting. Adjustments should be made by a qualified
technician.
FB-GRAND Full open
FB-IN 1/2 pulg.
NG LP
Full open
Full open
25