Canon opture 10 Instruction Manual page 99

7. Press the STOP. button on the wireless controller
to stop dubbing.
Audio device: Stop playback.
II
Set the zero set memory at the end of the scene you wish to dub audio. The
~~
.. camcorder will automatically stop audio dubbing at that point.
DI:l' .
D~,.I,
....... -
ArlrI_rI
C;n .......
rI
~ ~
;1%t~¥JJlQ~~~~%.t%W~;;@!WfiJ&iW=rj~
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
PI..AY (VCR)
-
1~112bil
AUDIO ..
·STERE01
I I
AUDIO
SET
UP
MENU button
MENU
(CD 43)
1. Open the menu and select [AUDIO SET UP]. Select [12bit AUDIO OUT],
select a setting and close the menu.
• STERE01: Plays back the original sound.
• STERE02: Plays back the added sound.
• MIx/FIXED: Plays back stereo 1 and stereo 2 in the same level.
• MIXNARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.
2. If you have selected [MIX/VARI.], adjust the mix level: Open the menu
and select [AUDIO SET UP]. Select [MIX BALANCE], adjust the balance
with the selector dial and close the menu.
Turn the selector dial down to increase the volume of Stereo 1 and up to increase the
volume of Stereo 2.
II
0
The camcorder resets to [STERE01] when you turn the camcorder off. However,
~~
......... the mix balance is memorized by the camcorder.
o
You can also press the 12bit AUDIO OUT button on the wireless controller to
sel~ct
the audio output. However, the mix balance can only be adjusted in the
menu.
99