Canon opture 10 Instruction Manual page 76

Adjusting the Focus Manually
Autofocus
may
not work well on the following subjects:
Subjects with
Reflective surfaces low contrast Fast Moving Subjects
(e.g. White Wall)
Horizontal Stripes
Through dirty or
wet windows
Different Distances Dark Subjects Night Scenes
CAMERA CARD CAMERA
1. Set the program selector to
[fl.
.
-
cv
II'
~!
~~
_ cv
- LL.
~ 15 2. Adjust the zoom.
cv
-.s
When you operate the zoom after adjusting the focus, the
~
.~
subject may not stay in focus. Adjust the zoom before the focus.
:=)
3. Press the FOCUS button.
"MF" appears.
4. Turn the focus ring to adjust the focus.
'. Turn the focus ring up or down until the image appears
focused.
5. Press the FOCUS button to return to autofocus.
FOCUS
~ (00)
~
Vi1
FOCUS
~ (00)
<YI
CODE
_ Tne setting resets to autofocus when you switch the program selector to D.
Si
76