Canon opture 10 Instruction Manual page 96

Example: AV Insert from a VCR
.............................................................................................................................................................................
1. Connect the camcorder to the VCR.
See
Playing Back on
a
TV Screen (OJ
40).
2. VCR: Load a recorded cassette. Locate the scene you wish to insert and
pause playback shortly before the scene.
3. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Make sure the tape-protect switch is set to allow recording.
4. Locate the scene you wish to replace and pause playback shortly before
the scene.
You can use the
play~ack
buttons on the camcorder or the special playback buttons on
the wireless controller.
5. Press the AV INSERT button on the wireless
controller.
II
AV INSERTII and
lIell
ll appear.
6. VCR: Play back the tape.
7. Press the PAUSE
II
button on the wireless controller
when the scene you wish to insert appears.
-
~
-S.
Press the STOP. button on the wireless controller
~
to stop inserting.
w
Press the PAUSE
II
button on the wireless controller to pause
inserting.
9. VCR: Stop playback.
II
Set the zero set memory at the end of the scene you wish to replace. The
~~
camcorder will automatically stop AV insert at that point.
96