Canon opture 10 Instruction Manual page 108

•
0 The setting resets to [SINGLE] when you turn the camcorder off.
~~
~......
0 Maximum number of continuous shots at one time (at 16 MB or more
available capacity):
Still Image Size
Optional VFL-1 Frames per
Maximum Number
Attached Second
of Continuous Shots
1280 x 960 Flash ON/OFF 2 frames 10 images
640 x 480
Flash OFF
3 frames
30 images
Flash ON 2 frames 10 images
*These figures are approximate and vary with the recording conditions and subjects.
o
If you attach the optional VFL-1 Video Flash Light, the practical range of the
flash in the Continuous Shooting mode is approx. 3.3
ft.
(1 m) to 6.6
ft.
(2 m).
AI'to
ExpOS'
're
Bracketigg
With Auto Exposure Bracketing (AEB), the camcorder records a
still
image in three
different exposures (dark, normal, light), allowing you to choose the perfect exposed shot.
CARD CAMERA
CAMERA
MENU
ICAMERA SET UP
I~IDRIVE
MODE· .. SINGLE
(CO 43)
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to
[AEB~]
and close the menu.
3. Press the PHOTO button.
Three still images in different exposures are recorded to the memory card.
ell
The setting resets to [SINGLE] when you turn the camcorder off.
•
CARD CAMERA
PLAY {VCR}
"~
Becording from
a
IapeJn the Camcorder
a
You can record images from a tape in the camcorder as still images on a memory card.
~
o
E
CLJ
~
~ 1. Set the camcorder to PLAY (VCR) mode.
l:
~
2. Play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other informatio"n
appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
108